NEWS |
Group NewsCommon faults and solutions on road sweepersFaults are unavoidable when using road sweepers, but many users don't know how to deal with these faults. So YIHONG engineers summed up 9 common faults and solutions on road sweepers. Might be useful for you. Following is the common faults and solutions: 1. Road sweepers leak from the tank. You can place a clean wipe spills with soap or bubble gum coated in oil at the temporary blockage, with epoxy adhesive patch, the better. 2. Road sweeper pipeline rupture. The rupture can wipe clean, apply soap, with a cloth or tape wrapped around the pipe rupture and tied tightly with wire and then coated with a layer of soap. 3. Road sweeper pipe break. Can find a fit with tubing diameter rubber or plastic tube sockets. If the socket is not tight enough, then both ends of the wire tied tight to prevent leakage. 4. Road sweeper head and other parts of trachoma and oil spills, leaks. According to trachoma size, choose the appropriate specifications for electrical fuses, hand hammer gently drop into the blisters, you can prevent oil spills, leaks. 5. Road sweepers hose fittings leak. Mostly flared tubing and tubing nut is not sealed due. Available yarn wound on the edge of the next speaker, then the tubing and tubing fittings and tighten the nut, can also be chewed bubble gum or maltose into a paste, applied to the seat tubing nut mouth, let it dry condensate newcomer seal. And can also be used to cut a length of plastic pipe forming placement. 6. Cups sweeping car precipitate rupture. Tube or plastic tube to precipitate out of the cup with tubing put on tape, so that the oil does not go through precipitation Cup straight. 7. Road sweeper inlet and outlet hose rupture. Rupture is not available coated with a layer of soap wrapped cloth leaks, such as rupture is large, you can cut the hose rupture, put in the middle of a bamboo or iron pipe, and tight wire bundles. 8. Road sweeper broken fan belt. The belt can be broken or tied with wire series using open the stop solution to drive away. 9. Holes Road sweeper slider cause spills or linkage is loose, it can not work. Repair the original screw with a hammer can hammer flat, so both sides of the expansion increases, and then fastening a good, but not repeatedly demolished when the time until the next maintenance. Consult or Inquiry about YIHONG Road Sweepers by email to info@yhroad.com or call at +86-371-86053830. |
